Anchor Elite, LLC GO to: www.AnchorElite.com (Previously - Anchor Enterprises 1996)
6 Moultrie Drive Taylors, SC,  USA, 29687		Anchors Aweigh With Your Problems!

Home History Benefits Industries Technical Finishers Management! Contact Us Other Associated Plant Services/ Products

Anchor Enterprises is a distributor for ENERCON SYSTEMS COMPANY, a Steam Specialist in the State-of-The-Art Steam Condensate Removal System and fixed orifice venturi nozzle technology. ENERCON is a boiler to Return line Steam Specialists. Some steam systems can be sized off site with all pertinent data supplied to the local distributor. Others require a Steam System Review including conventional steam traps to be conducted. ENERCON can improve your existing steam system, explain the venturi trap and/or provide information for your review. Used in a wide variety of industries, no steam job is too small or large. The greatest benefits being with total conversions. Pay back of one year or less is not uncommon in upgrading from conventional steam traps. It is possible to simply replace blown mechanical steam traps with the permanent multi-stage with sharp edge fixed orifice venturi tube, and prevent unplanned downtime. The best location to start conversion, is usually at the main steam header. President Carter awarded a civil engineer with the US NAVY for saving $10,000,000.00 in fuel in a single year by replacing conventional steam traps with venturi orifice steam traps. Replacing conventional traps in 4-5 year intervals was ELIMINATED, and removing the repetitive installation costs for welded traps. These additional cost savings of $100 per year per trap, for a total FLEET cost savings of $15,000,000.00 per YEAR. All costs have increased since that time, therefore saving are also greater. A good reference on steam in general with Chapter 6 detailing steam using sharp edge fixed orifices is The Steam Trap Handbook. Click: Visit at the Southeastern Dry Kiln Club in December 2007. Click: U.S. Coast Guard working with FEMP replaces old maintenance-intensive steam traps with Venturi Traps. Goal was to achieve energy savings. Click for USA GOV on Steam Induced Water Hammer: http://tis.eh.doe.gov/web/oeaf/lessons_learned/ons/sn9802.html http://www.hanford.gov/lessons/sitell/ll95/95i048.txt

	Venturi Trap wins EPA Energy Star award at IBM’s Thomas J Watson Research Center: http://198.252.9.108/govper/Mon.Hotline/www.epa.gov/climatewise/pdf/ibm.pdf
Visit our StoreFront @ TextileWeb. & President and CEO Magazine!	Assemblies include ENERCON condensate removal device  (22 steam orifice sizes), Y-strainer and blow-down valve. ENERCON ASSEMBLY INCLUDES:  1. STEAM ORIFICE WITH LIFETIME WARRANTY  2. Y-STRAINER  3. NIPPLE  4. BLOW DOWN VALVE