|
|
GO to: (was - Anchor Enterprises) |
|
|
6 Moultrie Drive |
|
|
|
|
|
|
Other Associated
Plant Services/ |
FINISHERS MANAGEMENT Finishers' Management is
the management magazine of the surface finishing industry, providing
in-depth, authoritative information on all aspects of metal finishing for the
"movers and shakers" who are also the present and future leaders of
this industry. Finishers' Management is of particular interest to
those on the "cutting edge" of metal finishing ... providing
information on the latest technology while always keeping an eye on the
bottom line. The August 2001 issue includes a
description of benefits of ENERCON ASSEMBLIES, venturi trap; Enercon Systems Company produces the Enercon assembly, which includes a 316 stainless condensate removal unit (with lifetime warranty), Y-strainer and blow down valve, is a permanent replacement for mechanical steam traps. Installed in 130 plating companies, it has typically resulted in 15 percent to 30 percent fuel savings, faster startups, substantially lower makeup water requirements and virtual elimination of steam trap maintenance. |
|
An
advertisement in the August 2001 issue
includes the following: Customers with
systems as long as 10 years have never replaced an Enercon unit. As an integral
part of every installation, Enercon conducts a steam system analysis and trap
survey. This includes evaluation of steam pressure, carryover, insulation,
separator, boiler chemicals, condensate, piping, insulation, and problems
such as pressure drops, inconsistent temperatures, slow startups and water
hammer. |
|
|
Click
following for Finishers’ Management home: http://www.finishers-management.com/index.htm |
|
|
Visit our StoreFronts @ & |
ENERCON ASSEMBLY INCLUDES: 1. FIXED
STEAM ORIFICE WITH LIFETIME WARRANTY |
|
Additional information includes: Use Steam?
This Little Device Can Cut Your Fuel Costs 15%-25% Two inches long and about six ounces. The thousands Enercon Systems Company has installed in industries through it’s distributor network since 1989 have helped make the steam systems of 135 platers more productive and fuel-efficient. Our unit does what mechanical steam traps are supposed to do for a steam system — get water out efficiently and keep steam in. Difference is ours is one piece. No moving parts cycling millions of times a year. No wear. No steam leaks. It’s permanent and it’s benefits are permanent. Example: In 1996, we saved the largest privately owned U.S. plater $108,000 (18%) in fuel and $20,000 in maintenance. Adds up to $640,000 in five years. Payback less than 12 months. No units replaced since. That’s why we have installations nationwide, including 38 plants for a $28 billion petrochemical company and why we’re troubleshooting, or installing in, a growing number of Fortune 1000 facilities. We impact the bottom line. If you net say 5% on your product, a $100,000 cost reduction is the profit equivalent of $2 million in new sales. Contact us to explore how we can significantly cut your steam-related operating costs. |
